The electronic latch released with a
click and Corey Hewitt opened the door onto a searingly bright room
filled wall to wall with rows of lush, green marijuana plants.
“This is not Cheech and Chong’s garage,”
said Hewitt, who is in charge of the growing, manufacturing and sale of
medical marijuana to patients for Columbia Care New York.
This
is the bloom room, where plants spend a couple of months producing
robust buds that will be harvested and crushed to extract oil that
is turned into medicine.
Scientists with degrees in
fields such as biology, botany, biomedical engineering,
forestry, chemistry and packaging science oversee each step. Until now,
seeing how they do it has been like trying to peer through the
impenetrable brick of the building itself: The hulking Building 12 at Eastman Business Park that houses cultivation and manufacturing operations.
Columbia Care is among 10 companies — and one of the original five
— licensed by New York state to make and sell medical marijuana. Each
company is allowed one manufacturing facility and four dispensaries. The
company is licensed in 12 jurisdictions around the nation. Because THC,
the psychotropic compound that gives the feeling of euphoria, is
illegal at the federal level, the product can't cross state lines. So
the company has multiple manufacturing sites.
The Columbia Care facility at Eastman Business Park makes all the products for its dispensary at Building 28
(Theater on the Ridge) and for its other dispensaries in Manhattan and
Riverhead on Long Island, and the one it is opening in Brooklyn.
Columbia Care had allowed media to see the dispensary when it opened,
and I'd written numerous stories about the company. Over the past two
years, I’d asked several times to see the manufacturing side.
Columbia Care received permission from the state Department of health, which regulates every aspect of medical marijuana, to provide a tour exclusively to the Democrat and Chronicle.
Hewitt said that based on the increased number of people certified to
use medical marijuana in New York and also Columbia Care’s own growth,
the time was right to show what goes on.
'Like being in a Christmas tree farm'
The elevator door opened onto a hallway and a smell hit me. I sniffed.
“It’s
the plant material,” said Hewitt, who was my guide along with security
chief James Sinclair. “It’s like smelling pine. It’s like being in a
Christmas tree farm.”
It didn’t smell that fresh in
the relatively stagnant air of the industrial corridor. A little like
old oregano, a little acrid like a skunk wandered by a while ago.
He said you can’t get high from just being around the plants, so if I thought I was feeling their effect, it would be my imagination.
Hewitt
said some parts of the tour would be off the record, but he wanted me
to see the whole process. Before we could see the plants, though, we had
to don lab coats, put booties over our shoes and caps over our hair.
“There
are bugs and things outside that could be on our clothing and
potentially risk the crops,” Hewitt said. “We’re very careful to make
sure we minimize it as much as possible.”
Nothing is grown from seed,
which means plants are cloned from other plants. We started where that
process begins — with the mother stock in what's called the mom room.
Dozens
of plants stood under LED lights. Cultivation manager Casey Berg said
the moms last four to six months. No worries about menopause. To make
the next generation, branches from the moms are cut and put in soil,
something similar to what a home gardener might do.
But
Berg watches over hundreds if not thousands (Hewitt declined to give
the number) of plants that are the basis for the whole operation.
Once
a cutting is put into soil, it’s put under a dome to control humidity
until the plant takes root and is strong enough to be potted. The
process can take four weeks.
A plant spends another four weeks in the vegetation room until it’s moved to the bloom room.
Every plant gets a barcode
and other identifiers so it can be tracked even after it’s made into a
product. “God forbid if we ever have a product recall, we’re able to go
right back to the mom strain and identify where it came from,” Hewitt
said.
Strict rules for growing, touching, harvesting
Columbia
Care grows hundreds of strains across the nation based on individual
state regulations and the company’s research on the role of medical
cannabis. In New York, Columbia Care primarily grows two strains.
One strain has a high content of THC, which can be used to relieve
pain.
The other has a high content of CBD (cannabidiol), which can be
used against inflammation.
They are combined into vapes, tablets and
tinctures in different ratios to treat different conditions.
The strains are kept separate throughout the process, even in the bloom room where they stay eight to 10 weeks until harvest.
Columbia Care has multiple bloom rooms. I wanted sunglasses when we walked into this one.
Squinting until my eyes adjusted, I saw that most of the plants were of uniform height and deep green. Large fans throughout the room created a breeze to keep the leaves moving, and here the scent was cleaner and more outdoorsy.
But
it wasn’t like strolling through Highland Park, where I could walk up
to a plant and feel whether its leaves were soft or tacky.
Hewitt was clear: Don’t touch.
Cannabis is a Schedule I drug according to federal law, and I was not
certified to handle the plant. I kept my hands to myself, trying to
avoid the leaves like they were poison ivy, but the rich green fronds
brushed my lab coat as I walked the narrow aisles between the movable
metal beds.
The bloom room is like a massive greenhouse. Employees
were pruning, but these cuttings would not be used for new plants.
Instead, they would be destroyed under strict guidelines from the state
health department.
All the plants are female and
there is no sexual reproduction, Berg said. They start to bud after two
to three weeks. To get the plants to fully flower, Berg mimics the
shorter days of fall by reducing the lighting.
Berg
reached for a bloom and pointed out the crystals that hold most of the
cannabinoid, a compound that the oil and ultimately the medicine comes
from.
Harvesting the plants is like shucking corn,
Hewitt said. Employees wear protective clothing, put on gloves and
strip the buds and leaves into a bucket. The leaves have some
cannabinoid and will be ground up with the bud. According to state
Department of Health regulations, the stalks have to be rendered inert
and then thrown out.
The buds and whatever leaves
come off are put on trays in a drying room. The lighting is subdued, and
big racks holding the buds look like something you’d see in a bakery.
Instead of the aroma of dough, I got whiffs of what pine tar might smell
like.
The scent was stronger in the room where the buds are ground into a fine powder. I wanted to grab a handful,
feel if it was as fuzzy as it looked or see if it would sift through my
fingers like sand on the beach. But it’s illegal and I'm a law-abiding
citizen. Besides, cameras are everywhere and security guards are burly
ex-football players.
Turning powder into oil
The next step is to extract the oil from that powder.
“Think about the perfume industry, rose petals, how you get perfume," Hewitt said. “Decaf coffee is similar.”
James
Kingsley, dressed in scrubs and looking like he’d be at home in a
hospital, runs the extraction process, which uses carbon dioxide at very
high pressure to squeeze out the oil.
The THC and
CBD strains still are separate. “It’s easier for us to make the final
product,” Hewitt said. “Imagine if you wanted vanilla-chocolate ice
cream and you threw it all together. It’s easier to make vanilla on one
side, chocolate on the other.”
There’s more to do before the oil can be made into a vape, tablet or tincture.
Hewitt
compared this step to cooking ground beef. Even if you drain the fat,
you’ll get some sludge after it’s been in the fridge. In the case of
cannabis oil, that congealed substance is called wax.
Chemist Zulema
Melchor runs a process that leaches and filters out the wax. The
apparatus where this happens had a rusty brownish stain. She also tests
for potency and how long it takes before the oil degrades.
“At
the end of the process, you’ll have pure oil,” Hewitt said, showing a
freezer full of containers stockpiled for current and future needs. “Now
we can start to build (products).”
Educated workforce makes medical marijuana
Columbia
Care started dispensing medical marijuana in January 2016. Hewitt said
the company has less than 200 employees statewide, but he did not give
the figure for the dispensary and the manufacturing sites in Rochester.
Berg was among the first.
The 29-year-old has a bachelor’s degree in plant science from Rutgers. I asked him if he had the job everyone wants.
“So I hear.”
If
the 450 applicants for a packaging job are any indication, Columbia
Care is a popular place to work. But the company is picky.
“We’re
not just taking people off the street and saying hey, come plant
marijuana, it’s fun,” Hewitt said. “We’re very serious about who we
bring in and making sure we get the best education levels.”
Columbia
Care has several graduates from the University of Rochester and
Rochester Institute of Technology. Every prospective employee
undergoes a background check that includes their social media history
and running their fingerprints through law enforcement databases.
Once hired, employees get extensive job, safety and security training. Despite working in what seems like lockdown, employees are free to talk about what they do.
Hewitt said when someone asks what he does and he tells them, “I don’t
hear, ‘Are you in the stoner building?’ ” Instead, he said he gets
questions about whether medical marijuana would work for their mom with
dementia.
Turning marijuana oil into medicine
Think
of chefs combining ingredients into the perfect recipe that turns out
exactly the same time and again. The chemists at Columbia Care do pretty
much the same thing.
Hewitt said that for products used to relieve pain, promote sleep and stimulate appetite, more THC is added. To treat seizures,
neuropathy or post-traumatic stress disorder, more CBD is used. CBD
also can counteract the euphoric effect of THC, according to information
provided by Columbia Care.
All products also are available in a 1:1
ratio. (A medical provider who certifies a person to receive the
medication can recommend the ratio, or the Columbia Care pharmacists can
make the decision after meeting with the individual.)
Samples of each lot are tested by the state to make sure they conform to standards of purity and potency.
To
make tablets, for example, the chemist would determine the proper
amount of THC and CBD for the ratio being created, add filler material
to create a powder and put the mixture into a hopper that feeds into die
cavities on a rotating table. As the table spins, force is applied to
each cavity to form the tablets.
While much of
the process is high-tech with lots of moving parts, some of it remains
labor intensive.
Tincture bottles are filled by squirting the liquid
through a hand-held pipette. Package cartons are glued one at a time.
Each product is made in the same sterile area, so the line has to be
cleaned between batches.
But that’s changing.
Keeping up
Twice
in 2017, the state health department changed regulations — first adding
chronic pain to the list of conditions that could be treated and then
letting companies make topicals, dissolvable lozenges and nonsmokable
ground-plant material.
Hewitt said the company
spent 2017 refining its processes and bulking up inventory of oil for
all its products. Instead of batches of 2,000, it’s now making lots in
the tens of thousands. I stood in the secure vault that would stymie Superman and saw the plastic totes full of products that are transported under strict chain of custody to the dispensaries.
Hewitt
declined to provide the number of Columbia Care clients but said growth
has been in proportion to increased demand statewide. As of May 8,
there were 54,256 people certified by 1,615 practitioners to use medical
marijuana, according to the Department of Health website. Hewitt said
the average age of Columbia Care customers is 54, and the gender mix is
about 50-50.
Columbia Care used to do everything in four rooms. To keep up with demand, the cultivation and processing operations are expanding into 48,000 of the 253,000 total square feet available in Building 12.
The
increased elbow room includes separate areas for different products, so
multiple lines can be made at once. He also said that by the end of the
year, filling tinctures will be fully automated. As of the past week,
the process to fold and glue the boxes became automated.
Hewitt said the company’s goal is to be able to act like any other pharmaceutical company if the federal government someday relaxes rules around marijuana.
I
asked Hewitt if Columbia Care were getting ready for New York to
legalize recreational marijuana, as some of its neighbors are doing.
No comments:
Post a Comment